National Instruments Expands C Series Family for High-Performance Data Logging
Written by Bharath Kumar
Sunday, 23 March 2008
National Instruments (Nasdaq: NATI) today announced four new C Series modules
for data-logging applications including vibration/acoustical data logging and
in-vehicle, structural, temperature and pressure testing.
The C Series combines signal conditioning, direct sensor connectivity and data
acquisition into a small module for each measurement type that can be inserted
into any C Series chassis to create a variety of systems. There are more than 40
C Series modules available for different measurements including thermocouple,
voltage, RTD, current, resistance, strain, digital (TTL and other),
accelerometers and microphones. The new modules, which expand the NI offering of
24-bit C Series modules for data-logging applications, are enhanced with the
inherent data acquisition and analysis features of NI LabVIEW software.
The new, bus-powered USB-9219, USB-9229 and USB-9239 four-channel
universal C Series modules are designed for multipurpose testing in any NI
CompactDAQ or CompactRIO chassis, or with the NI USB-9162 single module carrier.
With the new USB-9219 universal module, engineers can measure up to 11 types of
signals from sensors such as strain gages, RTDs, thermocouples and load cells.
With channel-to-channel isolation, an entire system, including the device under
test, is protected from harmful voltage spikes up to the isolation rating. In
addition to safety, isolation eliminates measurement errors caused by ground
loops. Measurement ranges for the USB-9219 include up to +/-60 V and +/-25 mA,
making it ideal for in-vehicle data-logging applications that often require 12
or 42 V of measurement range. The USB-9229 and USB-9239 high-speed data-logging
modules acquire 50 kS/s samples per second per channel and include anti-aliasing
filters to eliminate unwanted signals for monitoring applications such as
structural health, machine conditioning, electrical power and environmental
monitoring. The USB-9239 operates at +/-10 V for precise, high-speed sensor
measurement, while the USB-9229 operates at +/-60 V for sensors with a higher
output range such as proximity probes used for vibration data logging.
The NI 9234 dynamic signal acquisition module is ideal for vibration and
acoustical data logging because engineers can turn on or off IEPE conditioning
as well as select AC or DC coupling. The module delivers 24 bits of resolution,
102 dB of dynamic range and anti-aliasing filters. The NI 9234 module can be
used with the NI Sound and Vibration Measurement Suite, which includes the Sound
and Vibration Assistant to simplify acquiring and analyzing noise and vibration
signals by offering a stand-alone, interactive analysis and acquisition
environment. The stand-alone software makes it possible to continually interact
with varying data analysis settings while logging data to disk for future
analysis.
Engineers can use C Series modules with the USB-9162 single
module carrier and NI CompactDAQ and CompactRIO hardware. Combining this
hardware with LabVIEW software creates a user-defined data-logging application.
With LabVIEW graphical programming, engineers can create custom user interfaces
and take advantage of more than 600 math and analysis functions.
NI
provides both PC-based and embedded data-logging hardware approaches for a wide
span of data-logging applications. The small size, extreme ruggedness and
hot-swappable industrial I/O C Series modules are designed as self-contained
data-logging modules. All circuitry required for a specific measurement is
contained in the module and all A/D and D/A conversion takes place in the module
before data reaches a chassis. Different platforms offer flexibility for
different deployment options, making this the ideal platform for vibration and
acoustical, in-vehicle, structural, temperature and pressure data logging.
FTDI facilitates LabVIEW There is a lot of difficulty when one tries to connect our instruments to LabVIEW through USB .There is a lot of complexity , but I recently found out this manufacturer who supplies USB chips along...
There is a lot of difficulty when one tries to connect our instruments to LabVIEW through USB .There is a lot of complexity , but I recently found out this manufacturer who supplies USB chips along...